|
C0 And C1 Control Codes
The C0 and C1 control code or control character sets define control codes for use in text by computer systems that use ASCII and derivatives of ASCII. The codes represent additional information about the text, such as the position of a cursor, an instruction to start a new line, or a message that the text has been received. C0 codes are the range 00HEX–1FHEX and the default C0 set was originally defined in ISO 646 ( ASCII). C1 codes are the range 80HEX–9FHEX and the default C1 set was originally defined in ECMA-48 (harmonized later with ISO 6429). The ISO/IEC 2022 system of specifying control and graphic characters allows other C0 and C1 sets to be available for specialized applications, but they are rarely used. C0 controls ASCII defined 32 control characters, plus a necessary extra character for the DEL character, 7FHEX or 01111111BIN (needed to punch out all the holes on a paper tape and erase it). This large number of codes was desirable at the time, as ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Control Character
In computing and telecommunication, a control character or non-printing character (NPC) is a code point (a number) in a character set, that does not represent a written symbol. They are used as in-band signaling to cause effects other than the addition of a symbol to the text. All other characters are mainly printing, printable, or graphic characters, except perhaps for the "space" character (see ASCII printable characters). History Procedural signs in Morse code are a form of control character. A form of control characters were introduced in the 1870 Baudot code: NUL and DEL. The 1901 Murray code added the carriage return (CR) and line feed (LF), and other versions of the Baudot code included other control characters. The bell character (BEL), which rang a bell to alert operators, was also an early teletype control character. Control characters have also been called "format effectors". In ASCII There were quite a few control characters defined (33 in ASCII, and the ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Unix2dos
(sometimes named or ) is a tool to convert line breaks in a text file from Unix format (Line feed) to DOS format (carriage return + Line feed) and vice versa. When invoked as the program will convert a Unix text file to DOS format, when invoked as it will convert a DOS text file to UNIX format. A practical guide to Linux. Mark G. Sobell Page 55 Usage Unix2dos and dos2unix are not part of the Unix standard. Commercial Unixes usually come with their own implementation of unix2dos/dos2unix, like SunOS/Solaris's ''dos2unix/unix2dos'', HP-UX's ''dos2ux/ux2dos'' and Irix's ''to_unix/to_dos''. There exist many open source alternatives with different command names and options like ''dos2unix/unix2dos'', ''d2u/u2d'', ', ''endlines'', ''flip''. See the manual page of the respective commands. Alternatives to unix2dos conversion Alternatives to dos2unix conversion For the opposite conversion () it is possible to use, for example, the utility tr with the flag to remove the carri ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Hard Return
Newline (frequently called line ending, end of line (EOL), next line (NEL) or line break) is a control character or sequence of control characters in character encoding specifications such as ASCII, EBCDIC, Unicode, etc. This character, or a sequence of characters, is used to signify the end of a line of text and the start of a new one. History In the mid-1800s, long before the advent of teleprinters and teletype machines, Morse code operators or telegraphists invented and used Morse code prosigns to encode white space text formatting in formal written text messages. In particular the Morse prosign (mnemonic reak ext) represented by the concatenation of literal textual Morse codes "B" and "T" characters sent without the normal inter-character spacing is used in Morse code to encode and indicate a ''new line'' or ''new section'' in a formal text message. Later, in the age of modern teleprinters, standardized character set control codes were developed to aid in wh ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Newline
Newline (frequently called line ending, end of line (EOL), next line (NEL) or line break) is a control character or sequence of control characters in character encoding specifications such as ASCII, EBCDIC, Unicode, etc. This character, or a sequence of characters, is used to signify the end of a line of text and the start of a new one. History In the mid-1800s, long before the advent of teleprinters and teletype machines, Morse code operators or telegraphists invented and used Morse code prosigns to encode white space text formatting in formal written text messages. In particular the Morse prosign (mnemonic reak ext) represented by the concatenation of literal textual Morse codes "B" and "T" characters sent without the normal inter-character spacing is used in Morse code to encode and indicate a ''new line'' or ''new section'' in a formal text message. Later, in the age of modern teleprinters, standardized character set control codes were developed to aid in white space ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Line Feed
Newline (frequently called line ending, end of line (EOL), next line (NEL) or line break) is a control character or sequence of control characters in character encoding specifications such as ASCII, EBCDIC, Unicode, etc. This character, or a sequence of characters, is used to signify the end of a line of text and the start of a new one. History In the mid-1800s, long before the advent of teleprinters and teletype machines, Morse code operators or telegraphists invented and used Morse code prosigns to encode white space text formatting in formal written text messages. In particular the Morse prosign (mnemonic reak ext) represented by the concatenation of literal textual Morse codes "B" and "T" characters sent without the normal inter-character spacing is used in Morse code to encode and indicate a ''new line'' or ''new section'' in a formal text message. Later, in the age of modern teleprinters, standardized character set control codes were developed to aid in white spac ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
ASCII
ASCII ( ), abbreviated from American Standard Code for Information Interchange, is a character encoding standard for electronic communication. ASCII codes represent text in computers, telecommunications equipment, and other devices. Because of technical limitations of computer systems at the time it was invented, ASCII has just 128 code points, of which only 95 are , which severely limited its scope. All modern computer systems instead use Unicode, which has millions of code points, but the first 128 of these are the same as the ASCII set. The Internet Assigned Numbers Authority (IANA) prefers the name US-ASCII for this character encoding. ASCII is one of the IEEE milestones. Overview ASCII was developed from telegraph code. Its first commercial use was as a seven-bit teleprinter code promoted by Bell data services. Work on the ASCII standard began in May 1961, with the first meeting of the American Standards Association's (ASA) (now the American National Standards I ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Control Characters
In computing and telecommunication, a control character or non-printing character (NPC) is a code point (a number) in a character set, that does not represent a written symbol. They are used as in-band signaling to cause effects other than the addition of a symbol to the text. All other characters are mainly printing, printable, or graphic characters, except perhaps for the "space" character (see ASCII printable characters). History Procedural signs in Morse code are a form of control character. A form of control characters were introduced in the 1870 Baudot code: NUL and DEL. The 1901 Murray code added the carriage return (CR) and line feed (LF), and other versions of the Baudot code included other control characters. The bell character (BEL), which rang a bell to alert operators, was also an early teletype control character. Control characters have also been called "format effectors". In ASCII There were quite a few control characters defined (33 in ASCII, and the E ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Newline
Newline (frequently called line ending, end of line (EOL), next line (NEL) or line break) is a control character or sequence of control characters in character encoding specifications such as ASCII, EBCDIC, Unicode, etc. This character, or a sequence of characters, is used to signify the end of a line of text and the start of a new one. History In the mid-1800s, long before the advent of teleprinters and teletype machines, Morse code operators or telegraphists invented and used Morse code prosigns to encode white space text formatting in formal written text messages. In particular the Morse prosign (mnemonic reak ext) represented by the concatenation of literal textual Morse codes "B" and "T" characters sent without the normal inter-character spacing is used in Morse code to encode and indicate a ''new line'' or ''new section'' in a formal text message. Later, in the age of modern teleprinters, standardized character set control codes were developed to aid in white space ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
HTML Entity
In SGML, HTML and XML documents, the logical constructs known as ''character data'' and ''attribute values'' consist of sequences of characters, in which each character can manifest directly (representing itself), or can be represented by a series of characters called a ''character reference'', of which there are two types: a ''numeric character reference'' and a ''character entity reference''. This article lists the character entity references that are valid in HTML and XML documents. A character entity reference refers to the content of a named entity. An entity declaration is created by using the syntax in a Document Type Definition (DTD). Character reference overview A numeric character reference refers to a character by its Universal Character Set/Unicode ''code point'', and uses the format: :&#''nnnn''; or :&#x''hhhh''; where ''nnnn'' is the code point in decimal form, and ''hhhh'' is the code point in hexadecimal form. The x must be lowercase in XML documents. The ''nnnn' ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
Whitespace (computer Science)
In computer programming, whitespace is any character or series of characters that represent horizontal or vertical space in typography. When rendered, a whitespace character does not correspond to a visible mark, but typically does occupy an area on a page. For example, the common whitespace symbol (also ASCII 32) represents a blank space punctuation character in text, used as a word divider in Western scripts. Overview With many keyboard layouts, a whitespace character may be entered by pressing . Horizontal whitespace may also be entered on many keyboards with the key, although the length of the space may vary. Vertical whitespace may be input by typing , which creates a 'newline' code sequence in most programs. On older keyboards, this key may instead be labeled , a holdover from typewriter keyboards' carriage return keys, which generated an electromechanical return to the left stop (Unicode character ) and a move to the next line (). Many early computer games used whitesp ... [...More Info...] [...Related Items...] OR: [Wikipedia] [Google] [Baidu] |
